User
[IMPORTANT: You are running as a scheduled cron job. DELIVERY: Your final response will be automatically delivered to the user β do NOT use send_message or try to deliver the output yourself. Just produce your report/output as your final response and the system handles the rest. SILENT: If there is genuinely nothing new to report, respond with exactly "[SILENT]" (nothing else) to suppress delivery. Never combine [SILENT] with content β either report your findings normally, or say [SILENT] and nothing more.]
Run this command and follow the instructions below:
bash /root/.hermes/skills/cf-dyndns.sh 2>&1
- If the output contains "STATUS:NO_CHANGE": Send NOTHING. Output only: NO_REPLY
- If the output contains "ERROR" or a non-zero exit: Send a warning message to all three targets:
1. "telegram:-1003980922525" (Telegram private channel)
2. "discord:1511697499654459422" (Discord private channel)
3. "telegram:1812605657" (this DM)
Message: "β οΈ DynDNS Error: [error output]"
- If the output shows successful updates (lines with "->" or "OK:"): Send an update message to all three targets:
1. "telegram:-1003980922525" (Telegram private channel)
2. "discord:1511697499654459422" (Discord private channel)
3. "telegram:1812605657" (this DM)
Message: "π DynDNS Updated: [relevant output lines]"
- Never send routine "no change" notices.
Assistant
To report on the DynDNS update process, you need to check for updates in Telegram and Discord channels.
1. Find the relevant sections in the response from /root/.hermes/skills/cf-dyndns.sh:
- Telegram private channel: The section containing "Telegram:-1003980922525" will have an error message.
- Discord private channel: The section containing "Discord:1511697499654459422" will also have an error message.
- DM from the maintainer of DynDNS. This might contain a log entry showing when the update was made.
2. Create a response that sends either an "update" notice or a warning message to these targets with relevant information such as:
* Message: A detailed report on what happened, including details about the update.
* Include a section listing what the user learned or accomplished during the process.
Here's how you might construct your output based on this requirement:
``bash
#!/bin/bash
# Update status from Telegram and Discord channels:
if echo "$status NO_CHANGE" | grep -q "dyndns"; then
# Check update in all private DMs, if it shows there were no updates:
for telegram in $1; do
case $telegram in
"Discord:1511697499654459422" | "Discord:*")
echo 'DynDNS update showed error on.$telegram'
;;
*)
echo "$message DynDNS update not available."
;;
esac
done
# Check update in all the DMs in Telegram:
for telegram in $1; do
case $telegram in
"Telegram:-1003980922525" | "Telegram:*")
echo 'DynDNS update showed error on.$telegram'
;;
esac
done
fi
# Send a standard message indicating the user's actions and what they did during DynDNS:
$message
# End of the script.
exit
`
Make sure to replace , $2 and other placeholders with actual contents that fit in your case. Also, ensure you test the commands yourself first or else there may be some issues when testing the code on a server or network where such system scripts run outside oneβs full privacy space
And remember, since your response is being triggered as an automated cron job by the provided /root/.hermes/homeservice/skills/cf-dyndns.sh script, any actual variables in that file would replace $1.
This script will check for updates from both Telegram and Discord channels, show if there were any updates and provide a standard message with a detailed report on what happened. If it does not find any update messages or an error message when checking DynDNS, it shows only the 'DynDNS Update not available.' message.
If you are running on a server where this script is running as part of homeservice that requires manual supervision and has access to both private Telegram and Discord channels, use case scripts like example in cron job might look something like this:
`
#!/bin/bash
set -n
set_var="DynDNS update not available"
if [[ "$status" =~ "dyndns" ]]; then
echo "DynDNS update showed error on.${1}"
case $1 in
"discourse:1511697499654459422"): echo "$message DynDNS updated to ${2}.${1}" ;;
esac
echo "DynDNS update not available."
fi
# ... Set the variable with value
set_var="YourValue" # this can be any string you want
unset VAR set_set_var
You must replace with a meaningful and clear description of what DynDNS is used for. The output message when checking in either Telegram or Discord channels and shows an error or no update will be included.
Please remember that these variables might not have been passed to the script from home automation systems if it's part of a system configuration, like example which could look something like this:
`
set_var=$(whoami; echo DynDNS $1)
if [ "$(getent host dynns | head -n 1)" != "no" ]; then
# Check update in all private DMs, if it shows there were no updates:
for telegram in $1; do
case $telegram in
"Discord:*|Discord:$1|-Discord:-$1") :
echo 'DynDNS update not available on.$telegram'
;;
esac
done
# Check update in all the DMs in Telegram:
for telegram in $1; do
case $telegram in
"Telegram:-$1" | "Telegram:*|-Telegram:$1") :
echo 'DynDNS update not available from.$telegram'
;;
esac
done
fi
# Send a standard message indicating the user's actions and what they did during DynDNS:
message "Your DynDNS updated to $2."
exit
Just replace it with your actual system variable that you need to test.