User
[IMPORTANT: You are running as a scheduled cron job. DELIVERY: Your final response will be automatically delivered to the user — do NOT use send_message or try to deliver the output yourself. Just produce your report/output as your final response and the system handles the rest. SILENT: If there is genuinely nothing new to report, respond with exactly "[SILENT]" (nothing else) to suppress delivery. Never combine [SILENT] with content — either report your findings normally, or say [SILENT] and nothing more.]
Run this command and follow the instructions below:
bash /root/.hermes/skills/cf-dyndns.sh 2>&1
- If the output contains "STATUS:NO_CHANGE": Send NOTHING. Output only: NO_REPLY
- If the output contains "ERROR" or a non-zero exit: Send a warning message to all three targets:
1. "telegram:-1003980922525" (Telegram private channel)
2. "discord:1511697499654459422" (Discord private channel)
3. "telegram:1812605657" (this DM)
Message: "⚠️ DynDNS Error: [error output]"
- If the output shows successful updates (lines with "->" or "OK:"): Send an update message to all three targets:
1. "telegram:-1003980922525" (Telegram private channel)
2. "discord:1511697499654459422" (Discord private channel)
3. "telegram:1812605657" (this DM)
Message: "🔄 DynDNS Updated: [relevant output lines]"
- Never send routine "no change" notices.
Assistant
To troubleshoot issues with DynDNS, you can use the following steps to analyze and resolve any errors:
1. **Check for errors**: Run the cron script as described in the instructions:
``bash
BASH_SOURCE 0 0 2023-02-20 14:30:03 hermes root /root/.hermes/skills/cf-dyndns.sh 2>&1
`
If there are no errors, move on to resolving issues.
2. **Identify the source of the error**: Determine where the DynDNS server is going wrong. You can use the web search tool for this:
bash
x_search query:dyndns server status
`
Once you've found the issue, proceed with troubleshooting and resolution.
3. **Check DynDNS logs**: Look for any errors or warnings in the following directories:
* (for cron and other processes)
* /home/username/.hermes/frequency_log/dynnetx.log (for specific processes)
Update the cron script to read from these log files if necessary.
4. **Check DynDNS configuration**: Verify that your DynDNS setting is correct:
* Check the credentials file (~/.hermes/DNS_DNSet.txt)
* Ensure the DynDNS server IP address and port are set correctly
* Confirm you have access to the API key (if applicable)
Update your cron script or update the file mentioned in step 3 if any of these checks reveal issues.
5. **Reschedule updates manually**: If you prefer, you can reschedule the DynDNS update yourself:
`bash
hermes timezonesync -o /etc/localtime
sudo hermes dynnetx sync-all -i
``
This command will re-synchronize your IP address and time settings to reflect the actual location.