User
[IMPORTANT: You are running as a scheduled cron job. DELIVERY: Your final response will be automatically delivered to the user — do NOT use send_message or try to deliver the output yourself. Just produce your report/output as your final response and the system handles the rest. SILENT: If there is genuinely nothing new to report, respond with exactly "[SILENT]" (nothing else) to suppress delivery. Never combine [SILENT] with content — either report your findings normally, or say [SILENT] and nothing more.]
Run this command and follow the instructions below:
bash /root/.hermes/skills/cf-dyndns.sh 2>&1
- If the output contains "STATUS:NO_CHANGE": Send NOTHING. Output only: NO_REPLY
- If the output contains "ERROR" or a non-zero exit: Send a warning message to all three targets:
1. "telegram:-1003980922525" (Telegram private channel)
2. "discord:1511697499654459422" (Discord private channel)
3. "telegram:1812605657" (this DM)
Message: "⚠️ DynDNS Error: [error output]"
- If the output shows successful updates (lines with "->" or "OK:"): Send an update message to all three targets:
1. "telegram:-1003980922525" (Telegram private channel)
2. "discord:1511697499654459422" (Discord private channel)
3. "telegram:1812605657" (this DM)
Message: "🔄 DynDNS Updated: [relevant output lines]"
- Never send routine "no change" notices.
Assistant
To resolve the issue with your DynDNS configuration, follow these steps:
1. Check for errors in theDyn.js file:
``json
{
"$schema": "././index.js#",
"version": 2,
"kind": "application",
"properties": {
"status": "error", // This is the current status of the service.
"errors": [
{
"name": "STATUS:NO_CHANGE"
}
]
},
"definition": "././index.js#"
}
`
If there are no errors, it means your DynDNS is working correctly.
2. Run with the --debug flag to enable debug mode:
`bash
#!/bin/bash
/path/to/cf-dyndns.sh --debug 2>&1
`
This will display more detailed information about the dyn DNS configuration, which can help identify any issues.
3. Check for permission errors on your firewall or routers.
Ensure that the service (which listens to port 53) is allowed to communicate with your DynDNS.
4. Verify that your DynDNS servers are reachable from your router's IP address:
You can do this by:
a. Logging into your router's web interface
b. Trying an IP address test such as 8.8.8.8 or 1.1.1.1`
5. If you're using a third-party service that controls your DynDNS (like OpenWRT), check the documentation for any specific requirements:
e.g., if you changed network settings, ensure DNS servers were updated accordingly
6. Wait until you have verification on DynDNS output.
7. Once verified your dynns are receiving and sending info from your system.